ReadyLift 6'' Lift Kit with Falcon Shocks with Ring and Crossmember Standard Output Diesel Motor
ReadyLIFT is excited to announce PN: 49-19610, an all-new 4-corner coil spring 6" lift kit with Falcon 1.1 Monotube shocks for the 2019-2023 Ram 2500 HD trucks equipped with the Standard Output Cummins turbodiesel engine providing plenty of clearance for an aggressive 37x12.5 tire and up to -18 offset wheel with no rubbing; delivering a beefy, tough look. The 49-19610 is specifically designed for Ram Heavy Duty applications with proprietary front and rear coil springs, heavy-duty radius arm drop brackets, heavy-duty fabricated steel front and rear track bar brackets, forged dropped pitman arm, front/rear sway bar relocation brackets and bump stop extensions preventing over-compression of the new Falcon 1.1 Monotube front & rear shocks that are included in this premium kit. This kit includes a unique CNC-machined 6061-T6 billet Aluminum Driveline Indexing System (DIS) that re-clocks the transfer case aligning the front output shaft for improved driveline angles. Some Ram HD trucks can experience a slight vibration after lifting due to driveline angle sensitivity. ReadyLIFT 6" lift kit with the Drive Line Indexing System (DIS) addresses this condition by re-clocking [indexing] the transfer case and providing a stout heavy-duty steel cross member that accommodates the new T-case position, all resulting in a smooth driving experience on or off-road.
6'' Lift Kit 2019-2023 Ram 2500 W/ Falcon Shocks And Ring And Crossmember Standard Output Diesel Motor
Features & Benefits
- Designed for Ram Heavy Duty applications
- Proprietary front and rear coil springs
- Heavyduty radius arm drop brackets
- Heavyduty fabricated steel front and rear track bar brackets
- Forged dropped pitman arm
- Front/rear sway bar relocation brackets
- Bump stop extensions
- Prevents overcompression of new Falcon 1.1 Monotube front & rear shocks
- Premium kit includes Falcon 1.1 Monotube front & rear shocks
- Only available for 2500 HD Standard Output Motor and 68RFE Transmission
- Note: Single Cab configuration not validated for fitment & drivability by ReadyLIFT
Specifications
| 17 Inch Wheel Max Backspacing | 4.8 |
|---|---|
| 18 Inch Wheel Max Backspacing | 4.8 |
| 20 Inch or Larger Wheel Max Backspacing | 4.8 |
| Average Installation Time | 120 |
| Bushings Included | No |
| Fitment | Direct Fitment |
| Front Lift Component | Coil Spring |
| Front Lift Height | 6 Inches |
| Front or Rear | Front and Rear |
| Front Shocks | Falcon 1.1 Monotube |
| Install Difficulty | Difficult Requires Professional Installation |
| Installation Time | 5+ Hours |
| Lift Kit Category | Big Lift |
| Max Tire Diameter Custom Fit | 37 |
| Max Tire Diameter Sure Fit | 35 |
| Max Tire Size | 37 Inch |
| Maximum Lift | 6 |
| Mounting Hardware Included | Yes |
| Rear Lift Component | Coil Spring |
| Rear Lift Height | 6 |
| Rear Shocks | Falcon 1.1 Monotube |
| Shock Brand | Falcoln |
| Shocks Included | Yes |
⚠ WARNING (California Prop 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.
| Box Dimensions (L × W × H) | 47.75" × 12.63" × 24" |
|---|---|
| Shipping Weight | 323 lb |
| Lowering / Lift | Lift 4" or more |
| UPC | 194933189700 |
| Manufacturer Part # | 49-19610 |
| Front Height Range | +6" |
| Rear Height Range | +4" |