ReadyLift 4'' Coil Spring Lift Kit with Falcon 1.1 Monotube Front/Rear Shocks, Radius Arms, Dual Steering Stabilizer, and Front Track Bar Bracket
ReadyLIFT Suspension is excited to introduce a new Super Duty lift kit, the #49-23421, featuring a 4'' Coil Spring Kit with Tubular Radius Arms and Falcon Dual Steering Stabilizer. This kit includes front and rear Falcon 1.1 Monotube series performance shocks, a front track bar relocation bracket, tubular radius arms or radius drops, and rear fabricated blocks. Super Duty truck owners now have the perfect solution for lifting their trucks to accommodate larger tires, all while enhancing ground clearance and achieving an eye-catching look. This lift height strikes the ideal balance for Super Duty driving dynamics, allowing for maximum tire size while maintaining everyday usability. The all-new Radius Arms are designed to rectify the suspension geometry on lifted models, providing heavy-duty durability and the ability to withstand the demands of Super Duty trucks. These arms also offer additional tire clearance and allow for the installation of oversized tires with ease, thanks to their inward-formed design. Installation is a breeze with the direct bolt-on design. The inclusion of Falcon steering dampers in the 49-23421 kit ensures superior truck stability, a critical factor for any solid front axle vehicle equipped with oversized tires. Falcon steering stabilizers enhance handling on and off the road by reducing bump steer, improving steering feedback, and enhancing overall truck maneuverability and control. This lift kit allows for the use of tires up to 37'' tall. The coil spring kit's specially engineered coil springs, combined with Falcon 1.1 shocks and a track bar relocation bracket, significantly improve the Super Duty's ride and handling performance. This kit is not just a lift; it's a performance and ride-enhancing package that will impress consumers with its on-road and off-road capabilities.
4" COIL SPRING LIFT KIT WITH FALCON SHOCKS AND RADIUS ARMS - 2026 FORD SUPER DUTY F-250/F-350 4WD
Features & Benefits
- Fits 2026UP Ford Super Duty Power Stroke 4WD
- 4" Coil Spring Lift Kit
- (4) Monotube Falcon 1.1 Shocks
- Tubular Radius Arms correct caster angle
- Falcon Dual Steering Stabilizer included
- Bolt-on lift kit
- No structural modifications required
- Allows for up to 37" tall tires on 9" wide wheels with +18 offset
- For diesel trucks with rear singlewheel only
- Not recommended for 2WD or gas trucks
- NOTE: Tremor versions will not gain the full 4 inches over stock ride height
- Single Cab configuration has not been validated for fitment & drivability by ReadyLIFT
Specifications
| Fitment | Direct Fitment |
|---|---|
| Front Lift Component | Coil Spring |
| Front Lift Height | 4 Inches |
| Front or Rear | Front and Rear |
| Front Shocks | Falcon 1.1 Monotube |
| Install Difficulty | Difficult Requires Professional Installation |
| Installation Time | 5+ Hours |
| Max Tire Size | 37 Inch |
| Rear Lift Component | Block |
| Rear Lift Height | 4 Inches |
| Rear Shocks | Falcon 1.1 Monotube |
| Shocks Included | Yes |
⚠ WARNING (California Prop 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.
| Box Dimensions (L × W × H) | 30" × 11.5" × 12.5" |
|---|---|
| Shipping Weight | 165 lb |
| Lowering / Lift | Lift 2"–4" |
| UPC | 194933324415 |
| Manufacturer Part # | 49-23421 |
| Front Height Range | +4" |
| Rear Height Range | +4" |