IHC Suspension 2019-Present GM1500 4/6 Lowering Kit W/ Helper Bags (Single Cab)

IHC Suspension is excited to announce the most complete 2019-Present GM1500 4/6 lowering kit in the market. IHC Suspension coming from the service/installation side understood the challenges that other kits were not solving.
\\nOur key features that differentiate us from the competition and save you money:
\\nFACTORY RIDE QUALITY
\\nAlignment! No notching frame pockets for camber correction.
\\nNO C-NOTCH
\\nIHC’s control arm aligns to factory specs.
\\nStandard upper control arms for camber correction included. (No additional parts needed like camber/caster bushing or offset ball joints to align)
\\nIHC’s flip kit has the correct pinion angle built in so no need to use pinion shims.
\\nStandard helper bag kit included.
\\nMADE IN THE USA!
\\nManufactured in TEXAS!
\\nLifetime warranty on all metal parts!
\\nThis will not fit long bed models or X31 models.
\\nIHC Suspension designed our 2019-Present GM1500 4/6 lowering kit with ride quality being the #1 goal. We achieved that by lowering the front end with custom control arms. You achieve the 4” drop with the lower control arms, keeping stock springs, shocks, and spindles where OEM ride quality comes from. Upper control arms are standard in our kit to get your camber back in specs. Most kits require customers to notch frame pockets which are more time-consuming for installers and cost more in labor for the customer. Most times if notching is not done correctly lower control arms will constantly move and throw the alignment off. Not with IHC arms though.  The rear is lowered with a 6” flip kit. Nitrogen charged drop shocks and new u bolts are included. Standard helper bag kit is also included. This will prevent customers from bottoming out. We recommend 10-15 psi in bags at all times.
\\nTHIS WILL NOT FIT GM TRUCKS WITH MAGNETIC RIDE OR ADAPTIVE RIDE CONTROL.
\\nWILL NOT FIT ANY 4 WHEEL DRIVE APPLICATIONS.