BC Racing RM Series Coilover Kit Volvo V70 (P2) (AWD) (Exc. V70 XC) / 01-09 Volvo S60 (AWD) 2000-2007 (MA Type)
Specifications
Key Features
- Highly Customizable
- Inverted Mono-Tube Strut Design
- Linear Piston And Damping Curve
- Height Adjustment Independent Of Spring Compression
- 30-Clicks Of Simultaneous Compression/Rebound Adjustment
- Front Camber Plates Standard On Applicable Kits
- Rear Camber Plates Available For Applicable Kits
- Custom Spring Rates And Swift Spring Compatible
- Custom Valving Or Valving Paired For Custom Spring Rates
- 1-Year Warranty Against Manufacturers Defect
- Fully Rebuildable
Product Details
The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.
Adjustment that stays usable
Ride height is set independently of spring compression, so lowering the car does not preload the spring or cost you travel. Damping is a single 30-click sweep moving compression and rebound together — one adjustment per corner, easy to repeat and easy to undo.
Built to be serviced, not replaced
Every kit is fully rebuildable and can be revalved, and custom spring rates — including Swift Springs — are available if your setup outgrows the off-the-shelf specification.
Shipping & Warranty
- Ships from BC Racing North America (East or West coast facility), typically 2–3 business days in transit by ground.
- A signature is required on delivery for all complete kit orders — this cannot be waived.
- 2-year warranty against manufacturer defect.
- Fully rebuildable and revalvable.
Product images are representative of the RM Series and may not depict the exact hardware for this application.
| Shipping Weight | 58 lb |
|---|---|
| Manufacturer Part # | ZG-08-RM-MA |





